The pulsejet control device is the main control device of the pulse bag type dust collector. Its output electromagnetic drive pulse valve, so as to control the compressed air to bag sequential injection blowing, the running resistance of the dust remover to remain within the limits set, to ensure that the dust collector of the processing power and dust collection efficiency.Dust separator is divided into several storage compartments each compartment is individually clear ash, need to be clear of the warehouse to stop filtering, pulse control instrument output signal to close the chamber of the cylinder valve, the valve of the warehouse indoor electromagnetic pulse valve one by one.

   在線/離線、時序/壓差清灰方式

   Different modes including on-line, off-line, timed or pressure-differential for option.

   啟動/停止信號后，噴吹/遍停機

   Shutdown after N times of blowing (or delay) following startup signal and stop signal

   輸出點的屏蔽、替代和備用

   The shielding, replacement and stand-by services for the output point.

   短路、斷路、限位、壓差報警控制

   With short circuit, open circuit, limiting and pressure-differential alarm control.

   故障查詢及最高、最低壓差值記錄

   Records about fault query as well as highest and lowest pressure differences.

    Total output bits=the number of offline valves+the number of pulse valves=the bite of main frame (28)+the bits of 1" expansion unit+the bits of 2" expansion unit+