aƷ
}_ƃx}_ʽmϵyҪbݔ̖늴}_ys՚⌦Vѭʹm\OķԱCm̎ՉmЧ ˾aĴʽm}_ƃxжrxʽrҿǰ˞OĕrgԄӿҙCĹBѭhҿƃxǸVڳeۉmȵ׃ʽmMډֵ׃Ԅޕr_ʼޕrֹͣҲԸHFҪɷNƷʽYʹ ˾MچƬCӲYόFԄӿͨ^MNͬҪ书ܴ
ԭ
ƃxÿݔһλ늉һ늉mrgQ}_ݔ늉֮ggrgQ}_gƃxɌλ늴yݔҪĕrgQ}_ɂ}_֮gͣDrgQѭhg ƃxĿɆƬCFIOa@ʾѭhg}_g}_ȿݔݔ늴}_y_s՚ͬrаlO@ʾƹRȫmҕrһ߅^Vһ߅}_ƃxO}_Ⱥ}_gݔ̖}_y mҕrһ߅^Vһ߅}_ƃxO}_Ⱥ}_gݔ̖}_y
ʹügָ
Operating pressure | 0.2~0.6MPa |
|Working medium | 坍՚Clean air |
늉Voltage | DC24V AC110V AC220V(ʿ10%) |
Current | 1A 0.46A 0.23A |
ضȵȼTemperature level | 1.-25~80(-13H~176H) 2.ߜ-25~23(-13H~446H) |
՚Relative humidity of air | ՚≤85% |
oȼDegree of protection | IP65 |
ĤƬDiaphragm life | 100f3-5 |
ע1.늴}_yb 2.늴}_yxJCķȦ
|f
ywBody | ADC12XϽ ADC12 aluminum alloy |
Clamp spring | 304P 304stainless steel |
ȌMPilot component | 430FRP䓵Ȳ 430FR stainless steel,etc |
ĤƬDiaphragm | z/zNitrite rubber/fluororubber(high-temperature valve) |
Spring | 304P 304 stainless steel |
owFastener | 302P 302 stainless steel |
ĤƬ피ƷĤƬ|cMÿƬĤƬ^zyMb侀bÿһƷyMЙzyָȫϸɳS
Diaphragm with the top end of the film, the quality and import comparable, super tensile, each piece of the film are strictly detectedbefore entering the assembly line, the assembly after each finished product valve testing, the indicators are all qualified before the factory
̖x
bʾD
Ҏߴ
bʾ
1늴}_yćԴɚ()ṩ֚зκ͈AζNAη͉֚Ч^ʹ͛]ʽ늴}_yrη֚䰲b^
2֚ĽeLțQݷeݷeMԓM}_yÿ·ʣڇǰ50%M܃ȏQ֚ٶٶȑMԓM}_yÿ·10sʹȚw֏ǰ
3}_ybڷ֚ϲbr}_yݔIJڷ֚ľ}_yɰbڷ֚ײͬr}_yݔˑb̎ˮƽλɰbλ
4ܵćבС18_מ:8-32mm(hС)x200-400
늴}_yҊ
ʹA Stage of use |
ϬF Fault |
ԭ Cause analysis |
ų Eliminating method |
b{ԇ Installation and Commissioning |
yo_Ȍ Є Not all the valves can be opened,but the pilot part is running |
zǷ^ Check whether the air tank pressure is too low |
Ų© Check and prevent air leakage |
ijЩyy Some valves cannot run while others can |
zyľ·BӼȦ Check the line connections and sole-noids of the valves |
Q Replace relevant parts |
|
yoP]© o Not all the valves can be closed;there is air leakage; the air tank pressure cannot be established |
yMc෴b The air inlets and air outlets of the valves are reversely Installed |
°b Install the valves again |
|
ijЩyoP]© Some valves cannot be closed, there is air leakage |
s|ĤƬFопF There are foreign matters on the diaphragms; the armatures are seized |
坍ĤƬzĤƬǷ zFо Clean the diaphragms and check whether they are complete; check the armatures and the air plugs |
|
ʹ^ Use |
yP] Valve closing is slow |
ĤƬܶ The diaphragm orifices are blocked |
ͨĤƬ Unblock them |
ijЩy©ĤƬP y_ Some valves leak, they often open,their diaphragms cannot be closed com-pletely |
s|ĤƬȌpFопF There are foreign matters on the diaphragms; the pilot parts are dam-aged; the armatures are seized |
坍ĤƬzĤƬǷ zFоrQ Clean the diaphragms and check whether they are complete; check the armatures and the air plugs; replace relevant parts promptly |
|
Ȧl There is solenoid heating or burning |
Lrgͨ The valves have been powered on for a very long time |
zϵyĹr Cheak the operating status of the control system |
|
늉y There is voltage but the valves cannot run |
ĤƬpĻܶ Diaphragm is damaged, pilot opening is blocked |
rQ Replace relevant parts promptly |
|
hضȵy©o_ The ambient temperature is low; the valves leak or cannot be opened |
hض^yнYF Ambient air temperature too low valve intelnal frozen |
עⱣ Keep a properly high temperature |